No Bytes

Update Snips.ai has been acquired by Sonos ( see this message of Sonos ) and Snips Console will be discontinued at the end of January 2020 ( see this message of Snips ). Under this circumstances, it makes no sense to continue this project. 😔 Installing Snips.AI Well, you read until here, so I guess you really want to use Snips.ai on your Rock Pi S. So let's solve some new problems. The usual way to install Snips.ai is to use another computer in the same network and execute the following steps: sam connect <device> sam init sam ... But - this does no longer work. A Short Tale Of Workarounds Currently (2019-12-18), it is not possible to install Snips.ai agent on the previously prepared Rock Pi S with Debian Stretch, hence there are no binaries for  arm64-architecture  of stretch. Unfortunately, arm64 is the current architecture of the Rock Pi S' CPU. I've tried some things before I found a solution. This is the list of things that  did not ...

After the 2nd part of the Rock Pi S setup , I was confident to get some sound out of the board after I made a little hardware hack and connected it to my speaker (with amplifier). Unfortunately, the command speaker-test -t wav -c 2 did not bring any sound out of the Rock Pi S. So there still was a problem left and I had to google it once more.  Thanks to DIYprojecz in Radxa Forum ... I was once more able to fix a problem. For details see  https://forum.radxa.com/t/audio-support-rock-pi-s/1686/28 . What needs to be done: sudo su route add default gw <your.gateway.ip.address> eth0 echo "deb http://apt.radxa.com/stretch-testing/ stretch main" | sudo tee /etc/apt/sources.list.d/apt-radxa-com.list wget -O -  apt.radxa.com/stretch-testing/public.key | sudo apt-key add - apt-get update apt-get upgrade apt-get install -y rockchip-overlay rockchip-fstab apt-get install -y linux-4.4-rockpis-latest rockpis-dtbo apt-get autoremove chmod a+r /etc/group The N...